TISSUE CULTURE
1 - 24 of 108 products
Y87015
TubeSpin, conical tube 15ml, plp, with bioreactor, filter, 5 openings, TPP
The TubeSpin® Bioreactors are ideal for large-scale screenings and optimising growth of the suspension cell system processes. The important parameters for the production upscaling can be evaluated with small amounts. This lowers the cost and increases the efficiency of the process. Working volume: TubeSpin® Bioreactor 15 (1 - 15 ml), TubeSpin® Bioreactor 50 (1 - 35 ml), TubeSpin® Bioreactor 450 (± 300 ml), TubeSpin® Bioreactor 600 (± 400 ml). Filter screw cap with 5 (A-B-C-D-E) or 10 different openings above the gas permeable, sterile PTFE filter. Sterile gas exchange is guaranteed by the 0,22 µm filter membrane. Fits standard centrifuge apparatus. Matching adapter plates for shakers available (Bioreactor 600).
Box
(800)
Y87414
Adapterplate 164 x 50ml for Kuhner for TubeSpin Bioreactor, aluminium, TPP
Shaker plate fits the relevant shaker model. In aluminium. Guarantees largest possible volume for each shaker plate. Secure fixation of the tubes with vertical bars.
Piece
Y90825
Vent screw cap for TC flask 25cm², TPP
The "VENT" screw caps have 2 positions. The position at 12h is for gas exchange (open) and the position at 3h is without gas exchange (closed).
Box
(40)
Y91015
Tube in polyproplyene 120x17,1mm 15ml conical, TPP
White writing circle on screw cap for easy labelling with ballpoint pen or felt-tip pen.Caps that cannot be over-tightened. Gas and aerosol tight closable cap. Graduations of 0,1 and 0,5 ml respectively.Only pure raw materials of the highest quality that meet the requirements of USP Class VI are used.
Box
(800)
Y91106
Tube in polystyreen, 125x16 5ml 20cm², round, TPP
These tubes are an extension to the tissue culture flask product range.Flat Tissue Culture Tube 10 cm²:10 cm² surface activated growth area. Large opening for complete access of pipettes and scrapers. Great optical clarity for visual control with inverted microscopes. Sloped and flattened top minimises disturbing light refraction. Fits any 50 ml standard tube adapter, can be centrifuged up to 1.200 g. Conical form eases removal of pellets. Segmental packaging for scratch-free transportation. Tissue Culture Tube 20 cm²:20 cm² surface activated growth area, growth area for a length of 50 mm. Graduated up to the tip. In one click the "VENT" screw cap is in aeration mode, guaranteeing gas exchange even in vertical position. Fits a 15 ml standard tube adapter, can be centrifuged up to 1.200 g. Convenient, reclosable zipper bag with laser perforation.
Box
(800)
Y9340
TC petri dish, internal diameter 34mm, growth surface 9.2cm², TPP
Surface activation of the growth area enhancing optimal proliferation of the cells. Side walls of dish not surface activated. Gripping ring with serrated edges prevent accidental dropping of the dish bottom. Lateral yellow inscription field on the lid. Stacking ring on the lid and corresponding ridge on the base result in an extremely secure stacking feature. Spacer on the inside of the dish lid for a constant movement of air. Clock-numbering system (3, 6, 9 and 12) integrated into the base of the dish allows identification, area determination and documentation of the zones. Vents in the dish base provide airflow between stacked dishes for consistent growth conditions and prevention of condensation. Impeccable optical clarity enables a visual control of the cells through stacked dishes using transmitted light.
Box
(900)
Y99013
Rack in polypropylene for 3x tube Spin Bioreactor 600, 146x366x70mm, TPP
The racks and boxes have alphanumeric inscription to identify the samples. They are heat resistant, autoclavable and reusable.
Rack for TubeSpin® Bioreactor 600:
Fits 3 vessels.
Stackable.
Safe and stable bottom.Working temperature: from +121°C to -190°C
Cryo box “S” or “L”:
Cryo box “S” fits 81 cryo tubes of 1,2 ml and 2 ml.
Cryo box “L” fits 81 cryo tubes of 3,8 ml and 4,5 ml. Single-handed removal of lid possible, even after multiple usage.Working temperature: from +121°C to -196°C.
Cryo rack with star-shaped insertions:
Fits 40 cryo tubes with star foot.
Ready-mounted rubber feet.
Locking system in the grooves allows single-handed operation when used with TPP cryo tubes.Working temperature: from +121°C to -196°C.
Rack “S” or “L”:
Fits any 15 ml and 50 ml centrifuge tube.
Quickly assembled and disassembled.
Saves space if stored dismantled.Working temperature: from +121°C to -190°C.Rack for tissue culture tubes: Transparent top.
Protection rim to protect shifting of tissue culture flat tubes 10 cm².Working temperature: from +121°C to -190°C.
Box
(6)
Y99722
Syringe filter 0,22µm diameter 33mm x 27mm, in PES, sterile in blister, TPP
TPP syringe filters are intended to filter aqueous solutions such as tissue culture media, buffers, protein solutions, virus suspensions and DNA. PES filter membrane with pore size 0,45 µm for a pre-filtration.PES filter membrane with pore size 0,22 µm for sterilization. Membrane with a high flow rate with minimal protein binding. Standard Luer-lock connection enables a filtration at high pressure by using a syringe. > 100 µl dead volume. Bursting pressure of 10 bar. Individually packed in blister.
Box
(40)
/ Carton
(200)
Y87005
Mini pvc tube for celcounting, 1ml, diam. 10.5 x 43 mm, without cap, TPP
The PCV tubes enable a quick and reproducible measuring technique of the cell volume. This method is ideal to monitor cell growth. A short centrifugation step (1 minute at 2.500 gx) is sufficient to form a pellet in the calibrated capillary. There the volume of the cell pellet can be read with the “easy read” measuring device. Both tubes, with and without graduation, fit into the microcentrifuges. "Easy read" measuring device: The PCV system provides a fast, easy to use, reproducible and accurate alternative to manually count cells with the hemocytometer. The PCV tubes enable the determination of the packed cell volume (PCV) in a cell suspension, resulting in absolute data correlating with parameters like protein content, cell count, metabolic activity and others. Optimal for PCV tubes. Accurate and reproducible cell pellet measuring.Solid reusable and easy handling measuring device. Scale of measurement 0 - 5 µl.
Box
(250)
Y89012
Cryotube en polypropylene, 1.2ml, diameter 12x37mm, graduation max. 0.9ml, TPP
Features:
Storage of samples in freezers or similar low-temperature equipment up to -196°C.
External thread with smooth internal surface eliminates undue specimen loss during sample disposal.
Secure and tight closure of the tube.
Self-standing on star-shaped foot.
Graduated with large writing surface.
Single-handed operation possible with the cryogenic rack Y99016: the tube cannot turn due to a locking system in the grooves.
Colour-coding inserts.
Convenient, reclosable bag, with zipper and laser perforation.
Recommendations:
Do not exceed the recommended maximum working volume.
Best suited for storage in the vapor phase: in liquid phase, nitrogen may penetrate into the tube and cause an increase of pressure due to self evaporation. This can result in explosion of the tube and the release of bio hazardous material.
For storage in liquid phase additional wrapping such as welded tubes is recommended.
Always follow procedures and use appropriate safety equipment.
Box
(100)
/ Carton
(800)
Y90028
TC flask with peel-off foil 25cm², 15ml, TPP
Large pinched flap for a firm grip.Peel off foil to access the cells.Not reclosable.Stable, slip-free stacking.Filter screw cap.
Box
(70)
Y9025
TC fles 25cm² 15ml, TPP
Flasks from 25 to 300 cm².Surface activated growth area for optimal adhesion and best proliferation of adherent cells.Geometry of the neck reduces risk of media slop over.Staple rim offers stable, slip free stapling of several flasks.Highly visible bilateral marking areas.White volume graduations on both sides for optic control of the filling volume.Crystal clear transparency.The filter screw caps offer constant sterile gas exchange through the hydrophobic non-wetting PTFE membrane with pore size 0,22 µm.The "VENT" screw caps have 2 positions. The position at 12h is for gas exchange (open) and the position at 3h is without gas exchange (closed).
Box
(360)
Y90552
TC flask peel off 150cm² with reclosable lid, TPP
Multi-use reclosable liquid-tight lid.Complete access to flask chamber from above.Stable, slip-free stacking.The flasks with barrier have a growth area of 115 cm².Filter screw cap.
Box
(18)
Y99150
Filter bottle 150ml with 0.22um filter in PES, 93x93x103mm, TPP
Large quadratic filter surface of 49 cm² and 69 cm² respectively. The special lamella grid support and premium PES filter membrane, with a pore size of 0,22 µm and a low protein binding, result in an extremely high flow rate. Square and robust shape, eliminates the risk of the filter unit falling over because of vacuum tubing. Space saving medium reservoir. The conical shaped neck enables a firm and slip free grip for both large and small hands.Each filter set comes with an adapter for the vacuum connection hose with an inside diameter of 6 - 10 mm and a separately packed screw cap. First pour the liquid in the filter, then apply the vacuum. Full flexibility: choice of filter set, top only or flask only, all provided with a GL-45 compatible screw thread.
Box
(18)
Y86050
TubeSpin with septumstop and barcode, round tube 50ml, plp, with bioreactor, filter, 5 openings, TPP
The TubeSpin® Bioreactor 50 with septum is intended for the use during laboratory automations such as: robotics use for sterile exchange of medium and solutions or withdrawal from cell based products. Features: Reclosable cross-slit septum for multiple entries. Compatible with injection needles up to Ø 2,1 mm (12G). Working volume < 50 ml, graduation markings start at 0,5 ml. Barcode 128 on each tube for automated tracking: the lot number plus the tube number render each tube unique. Sterile gas exchange through filter openings in the screw cap. Conical tube fits in standard 50 ml centrifuge adapter. Usage: Multiple robot entry with injection needles and cannulas through reclosable cross-slit septum. Sterile media and solution exchange or removal of cell based products, enabled by surface sterilization of septum. Septum access eliminates continuous screwing/unscrewing thanks to the robotic automation. Centrifugation of suspension cells without need of prior removal of the solution.
Box
(180)
Y9206
TC plate 6 x 9.03cm,² diameter 33,78mm, single packed sterile, TPP
Lid with air-venting system for controlled gas exchange with low evaporation.
Vented base provides air flow between stacked dishes to prevent condensation.
Sloped edge allows placement of the lid in one position only.
Yellow inscription field.
Surface activated growth area only at the bottom of the well.
Crystal clear transparency for excellent viewing.
Black alphanumeric characters for quick identification of the wells.
Clear alphanumeric characters between wells for orientation during microscopy.
In polystyrene.
96-wells:
Manufactured according to ANSI/SLAS 1 - 2004 to ANSI/SLAS 4 - 2004.
Standardised with an interleaved (ITF) barcode 2/5.
With flat bottom: excellent optical characteristics, suitable for precise optical measurements - the geometry has no influence on the measuring light and is suitable for microscopy applications (bottom reading).
With round bottom: no rims - well suited for pipetting, used for agglutination tests and “+/-” evaluations.
Box
(126)
Y9902
Cell scraper 24cmx12mm, TPP
The pivoting head of the cell scraper reaches every corner of the cell culture vessel. Pivot the scraper head by putting slight pressure on the handle with the forefinger and push the handle downwards. A slight move of the handle will twist the head to the required position.Made of flexible polyethylene. Pivoting scraper head for easy manoeuvring. Small raised knobs on handle for secure grip. Single-wrapped in blister packaging. User-friendly dispenser case.
Box
(150)
Y87017
Tubespin, tube round 50ml, plp, with bioreactor, filter, 5 openings, TPP
Box
(40)
/ Carton
(800)
Y89020
Cryotube in polypropylene, 2ml, diameter 12x48mm, graduation max. 1,5ml, TPP
Box
(100)
/ Carton
(800)